State Grid PC Series Three-Phase 1-Position Metering Box
The PC three-phase 1-position metering box is a complete box-type device for low-voltage energy metering at 380 V and below. It is primarily used to install core metering components such as electricity meters, meeting the functional requirements of energy metering, anti-tampering, and remote meter reading.
Product Description
Non-Metallic Meter Box (PC+ABS Material)
Wall-mounted or floor-standing installation, requires built-in expansion bolts for fixing.
Outdoor installation must meet IP34D protection rating, indoor not less than IP20.

Product Advantages
Energy Metering
Integrates electricity meters, voltage transformers, current transformers, and other devices to achieve accurate measurement of active and reactive energy.
Anti-Tampering Design
Certain models (e.g., prepayment metering boxes) use smart circuit breakers, electronic locks, and other technologies to eliminate the risk of external tampering.
Remote Management
Supports remote prepayment electricity purchase, load monitoring, and power-off for arrears, facilitating management by power utilities.
Direct-Connected
Suitable for single-phase or three-phase electricity meters without the need for transformers.
State Grid PC Series Three-Phase 1-Position Metering Box
HLD-PXS1.R010
PXS1.R010 PC Three-Phase 1-Meter Position Metering Box
| Rated Voltage | 380 V |
| Rated Insulation Voltage | 690 V |
| Insulation Resistance | 690 V |
| Material | PC+ABS |
| Frequency | 50 Hz |
| IP Rating | IP34D |
| Incoming Current | 100~63 A |
| Number of Outgoing Circuits | 1 Circuit |
| Outgoing Current | 80~6 A |
Main Configuration
| Configuration | Name | Specification | Quantity |
| Pre-Meter Configuration | Disconnect Switch | NH2-125/4P 100 A | 1 |
| Post-Meter Configuration | Circuit Breaker | DZ158-125/4P 100 A | 1 |
| Pre-Meter Configuration | Disconnect Switch | NH2-125/4P 100 A | 1 |
| Post-Meter Configuration | Circuit Breaker | DZ158LE-125/4P 100 A | 1 |
| Pre-Meter Configuration | Disconnect Switch | NH2-125/4P 100 A | 1 |
| Post-Meter Configuration | Circuit Breaker | ZJSB9-125Z/4P 100 A | 1 |



