State Grid PC Series Single-Phase 2-Position Metering Box
The PC single-phase 2-position metering box is a complete box-type assembly for low-voltage energy metering at 380 V, 220 V and below. It is primarily used to install core metering components such as energy meters, meeting functional requirements for energy metering, anti-tampering, and remote meter reading.
Product Description
Non-Metallic Meter Box (PC+ABS Material)
Wall-mounted or floor-standing installation, secured with built-in expansion bolts.
For outdoor installation, IP34D protection rating is required; for indoor installation, IP20 or higher.

Product Advantages
Energy Metering
Integrates energy meters, voltage transformers, current transformers, and other devices to achieve accurate measurement of active and reactive energy.
Anti-Tampering Design
Certain models (e.g., prepayment metering boxes) use technologies such as smart circuit breakers and electronic locks to eliminate external tampering risks.
Remote Management
Supports remote prepayment, load monitoring, and power-off upon arrears, facilitating power utility management.
Direct-Connected
Suitable for single-phase or three-phase energy meters without the need for current transformers.
State Grid PC Series Single-Phase 2-Position Metering Box
HLD-PXD2.R020
HLD-PXD2.R020 Single-Phase 2-Position Metering Box
| Rated Voltage | 220 V, 380 V |
| Rated Insulation Voltage | 690 V |
| Insulation Resistance | 690 V |
| Material | PC+ABS |
| Frequency | 50 Hz |
| IP Rating | IP34D |
| Incoming Current | 160~63 A |
| Number of Outgoing Circuits | 2 |
| Outgoing Current | 80~6 A |
Main Configuration
| Configuration | Name | Specification | Quantity |
| Main Switch Configuration | Terminal Block | FJ6/JTS2E-35/2x25 | 2 |
| Pre-Meter Configuration | Disconnect Switch | NH2-125/2P 100 A | 2 |
| Post-Meter Configuration | Circuit Breaker | DZ47-63H/2P 63 A | 2 |
| Main Switch Configuration | Molded Case Switch | NM1-125S/2300 125 A | 1 |
| Pre-Meter Configuration | Disconnect Switch | NH2-125/2P 100 A | 2 |
| Post-Meter Configuration | Circuit Breaker | DZ47LE-63/2P 63 A | 2 |
| Main Switch Configuration | Molded Case Switch | YCM1LE-225L/2300 225 A | 1 |
| Pre-Meter Configuration | Disconnect Switch | NH2-125/2P 100 A | 2 |
| Post-Meter Configuration | Circuit Breaker | ZJSB9-80Z/2P 63 A | 2 |



